Skip to content
RealSense ↗︎

RealSense D455

Depth camera: global-shutter infrared stereo and RGB with a 6-axis IMU

RealSense D455 depth camera, front view
Photo: RealSense, D455 product page ↗︎
Cameras
848 × 480 here: IR stereo + RGBMeasured
Shutter
GlobalMaker ↗︎
Field of view
Calibrated 89° × 58°Measured
87° × 58° depth, 90° × 65° RGBMaker ↗︎
Baseline
94.4 mmMeasured
IMU
BMI055, gyro 400 Hz, accel 250 HzMeasured
Output
USB-C, ROS bagMaker ↗︎

Maker values checked 2026-11-13 · 1 recording, 90 s · CC BY-NC 4.0

Depth camera from RealSense with a 95 mm global-shutter infrared stereo pair, a global-shutter RGB camera and a 6-axis IMU. One hand-held recording in front of a chessboard on a screen, solved as left infrared + right infrared + RGB + IMU.

The 3D scene MVIS recovered from this recording.
Reprojection median0.07 px
cam0–cam1 baseline94.4 mm
cam0 td+7.16 ms
cam0 lever arm33.1 mm

Reprojection is how far, in pixels, the detected corners lie from where the solve puts them. td is the camera–IMU time offset, and the lever arm is the camera–IMU position offset.

One recording, with no independent reference on this page. These values show what MVIS solved, not how close they are to the truth.

The path of the rig around the board, as MVIS solved it. To explore it:

  • Press Play or drag the bar to follow the path.
  • Use the view buttons to change the view.
  • Pick a camera card to put that camera on the frustum, the pyramid that shows its view.

Each card draws the board from the solved pose, with the corners MVIS detected. We publish no camera images.

The solved rig in 3D, to scale. Tap a sensor to see its values. In full screen you can rotate and zoom. Grid squares are 20 mm.

To scale, from above and the front

From above
xzcam0cam1cam269.6 mmbaseline 94.4 mm20 mm
From the front
xycam0cam1cam220 mm
CameraLever x, y, z (mm)Distance (mm)log(R) (rad)td (ms)Field of view
cam0−27.6, +7.3, +16.733.1[−0.003, −0.015, −0.006]+7.1689° × 58°
cam1+66.7, +6.9, +18.669.6[−0.002, −0.017, −0.006]+7.1689° × 58°
cam2+30.9, +7.0, +18.136.5[−0.003, −0.017, −0.005]+6.6791° × 60°

Solved by MVIS. Lever arms (camera–IMU position offsets) are in the IMU frame. Rotation is log(R), camera in the IMU frame.

Published by the maker
MakerRealSense (formerly Intel RealSense)
Camera moduleRealSense Module D450 with the Vision Processor D4
ShutterGlobal, on the infrared pair and the RGB camera
Infrared pair87° × 58° depth field of view, 95 mm baseline; recorded here at 848×480, 30 Hz, both images on one stamp
RGB camera1 MP, 90° × 65°, up to 1280×800 at 30 fps; recorded here at 848×480, about 33 Hz (30 requested)
LinkUSB-C; 124 × 29 × 26 mm
Measured in these recordings
IMUBosch BMI055 (maker); gyro 400 Hz, accelerometer about 250 Hz in this recording
Calibrated field of viewcam0 89° × 58° · cam1 89° × 58° · cam2 91° × 60°
Recording1 recording, 90 s, hand-held. About 2,700 frames per infrared camera, 2,985 RGB frames, 36,417 IMU samples
FormatROS1 bag
BoardChessboard shown on a screen, 10×7 squares (9×6 inner corners), 75 mm squares as measured by the recorder
ExposureFixed, about 2 ms on all three cameras; no auto exposure
DataCalibench community, realsense-d455/data/ (access by automatic approval). Everything except the chessboard is blurred. CC BY-NC 4.0, for the data, clip and figures; commercial use by request
Configs and resultsCalibench community, realsense-d455/ (access by automatic approval)
Chessboard 10 × 7 squares (9 × 6 inner corners), 75 mm squares, 750 × 525 mm. To scale
Lens Calibrated field of view

Calibrated field of view, horizontal × vertical. cam0: 89° × 58°, corners reach 46° from the axis · cam1: 89° × 58°, corners reach 46° from the axis · cam2: 91° × 60°, corners reach 47° from the axis

0°15°30°45°60°75°90°0.00.40.81.21.6Ray angle from the optical axisImage radius / f

cam0 cam1 cam2

We read these from the calibrated lens fit at the image edges, through the principal point (where the optical axis meets the image). ~ marks an axis past where the corners reached, so the fit is extrapolated there. Past the fit means an edge lies beyond where the fit holds, so we give no value.

IMU Gyro–accel time offset t_ga −5.44 ms

Each bar shows a scale as its deviation from 1. IMU model: calyx. t_ga, the time offset between the gyroscope and accelerometer channels: −5.44 ± 0.18 ms.

Gyro scale x+0.24 %
Gyro scale y−0.14 %
Gyro scale z+0.15 %
Accel scale x+1.41 %
Accel scale y+2.28 %
Accel scale z+0.73 %
−8 %0+8 %
Timing cam0 td +7.16 ms

The time offsets, to scale. td is the camera–IMU time offset, with t_imu = t_cam + td.

-10 ms-5 ms+0 ms+5 ms+10 mscam0 td+7.16cam1 td+7.16cam2 td+6.67t_ga−5.44
Full results Every solved parameter

Rotation is log(R) in rad, camera in the IMU frame.

ParameterMVIS
cam0
fx px429.48
fy px429.78
cx px423.91
cy px245.12
k10.00177
k2−0.00155
k30.00040
k40.00087
Lever x mm−27.65
Lever y mm+7.31
Lever z mm+16.67
log(R) rad[−0.0026, −0.0151, −0.0063]
td ms+7.155
Reprojection px0.120
cam1
fx px429.16
fy px429.53
cx px423.30
cy px245.24
k10.00378
k2−0.00429
k30.00028
k40.00053
Lever x mm+66.72
Lever y mm+6.86
Lever z mm+18.64
log(R) rad[−0.0025, −0.0165, −0.0063]
td ms+7.157
Reprojection px0.174
cam2
fx px421.97
fy px421.95
cx px424.24
cy px247.20
k1−0.04686
k20.03993
k30.00077
k40.00073
Lever x mm+30.89
Lever y mm+7.02
Lever z mm+18.12
log(R) rad[−0.0034, −0.0174, −0.0054]
td ms+6.671
Reprojection px0.105
IMU
t_ga ms−5.44 ± 0.18
  • One recording, with no independent reference on this page. These values show what MVIS solved, not how close they are to the truth.
  • The square size, 75 mm, is the recorder's measurement of the board shown on a screen, and it scales every baseline and lever arm. The solved stereo baseline is about 0.7 % under the 95 mm the maker lists.
  • The infrared images are the camera's own rectified output, so their distortion is close to zero by construction and the values describe that output, not the bare lens.
  • The recorder turned the camera's IMU correction off, so the IMU scale and bias values are those of the raw sensor. The accelerometer was resampled onto the gyro's time stamps before the solve.
  • Left infrared, right infrared and RGB cameras with the IMU in one solve, all three treated as global shutter. Pinhole camera with radial-tangential distortion, seeded from three single-camera solves of the same recording and left free; camera time offsets, IMU scale and misalignment and the gyro-to-accel offset t_ga estimated. The board is kept rigid. IMU noise is the MVIS default, since no measured values exist for this unit. Solved 2026-11-13.