Skip to content
Stereolabs ↗︎

Stereolabs ZED 2

Stereo depth camera: two rolling-shutter cameras with a 400 Hz IMU

Stereolabs ZED stereo camera, front view (the current ZED 2i, as on the product page)
Photo: Stereolabs, ZED 2 product page ↗︎
Cameras
2 × 1280×720 in the recordingDataset
Shutter
RollingMaker ↗︎
Field of view
Calibrated ~102° × 69°Measured
110° × 70°Maker ↗︎
Baseline
120.1 mmMeasured
IMU
6-axis, 400 HzMaker ↗︎
Output
USB 3.0; ROS bag in the datasetMaker ↗︎

Values measured in the WHUVID calibration recording · Maker values from the Stereolabs ZED 2 page, read 2026-11-17 · ~ marks a value read past where the board corners reached. Past the fit: the edge lies beyond where the lens fit holds, so we give no value.

Stereo depth camera from Stereolabs with two rolling-shutter cameras 120 mm apart, wide 2.1 mm lenses and a built-in IMU at 400 Hz. This is the camera of the WHUVID driving dataset from Wuhan University; both cameras and the IMU are solved together from the authors' own calibration recording, with the rolling-shutter readout estimated.

No video on this page. The values below come from the solved run.
Reprojection median0.28 px
cam0–cam1 baseline120.1 mm
cam0 td, first row−2.49 ms+4.54 ms at mid-frame
cam0 lever arm32.2 mm

Reprojection is how far, in pixels, the detected corners lie from where the solve puts them. td is the camera–IMU time offset, and the lever arm is the camera–IMU position offset.

No independent reference. The authors publish a Kalibr calibration from the same recording with a global-shutter camera model; it isn't an independent check.

The path of the rig around the board, as MVIS solved it. To explore it:

  • Press Play or drag the bar to follow the path.
  • Use the view buttons to change the view.
  • Pick a camera card to put that camera on the frustum, the pyramid that shows its view.

Each card draws the board from the solved pose, with the corners MVIS detected. We publish no camera images.

The solved rig in 3D, to scale. Tap a sensor to see its values. In full screen you can rotate and zoom. Grid squares are 20 mm.

To scale, from above and the front

From above
ycam0cam198.8 mmbaseline 120.1 mm20 mm
From the front
xycam0cam120 mm
CameraLever x, y, z (mm)Distance (mm)log(R) (rad)td (ms)Field of view
cam0−0.2, −24.1, −21.332.2[+2.202, +2.211, −0.042]−2.49~102° × 69°
cam1−0.4, +96.0, −23.398.8[+2.201, +2.208, −0.036]−2.46~102° × 69°

Solved by MVIS. Lever arms (camera–IMU position offsets) are in the IMU frame. Rotation is log(R), camera in the IMU frame.

Published by the maker
MakerStereolabs
Image sensors2 × 4 MP 1/3-inch back-illuminated CMOS, 2 µm pixels
ShutterRolling, the two cameras synchronised; readout 14.1 ms (left) and 14.0 ms (right) solved here
Lenses2.1 mm, 110° × 70° (120° diagonal)
Baseline120 mm
Video modesUp to 2208×1242 at 15 fps; 1280×720 at 60, 30 or 15 fps
Measured in these recordings
Images in the recording2 × 1280×720 grey at 19.7 Hz (the dataset states 30 fps)
IMU6-axis, 400 Hz on the sheet; 381 Hz in the recording
Calibrated field of viewcam0 ~102° × 69° · cam1 ~102° × 69°
From the dataset
ModelThe dataset names a ZED2. The original ZED 2 rather than the later ZED 2i is inferred from the recording date (December 2020) and the solved focal length
Recordings1 camera + IMU recording, 74 s, hand-held in front of the board. 1,457 frames per camera, 29,410 IMU samples
SourceWHUVID dataset (Wuhan University), calibration recording published by the authors
FormatROS 1 bag. Two IMU samples repeat the one before (same time and values) and are dropped
BoardAprilGrid 6×6, tag 20.8 mm, spacing 0.3
DataCalibench community, zed2/data/ (access by automatic approval). The authors' calibration bag, unchanged (myCalibrate.bag, 2.7 GB), with a script that drops the two repeated IMU samples. Recorded by the WHUVID authors; the dataset states no licence, so ask them before reuse
Configs and resultsCalibench community, zed2/ (access by automatic approval)
AprilGrid 6 × 6, 156 × 156 mm. Standard pattern, to scale
Lens Calibrated field of view

Calibrated field of view, horizontal × vertical. cam0: ~102° × 69°, corners reach 49° from the axis · cam1: ~102° × 69°, corners reach 49° from the axis

0°15°30°45°60°75°90°0.00.40.81.21.6Ray angle from the optical axisImage radius / f

cam0 cam1

We read these from the calibrated lens fit at the image edges, through the principal point (where the optical axis meets the image). ~ marks an axis past where the corners reached, so the fit is extrapolated there. Past the fit means an edge lies beyond where the fit holds, so we give no value.

IMU Gyro–accel time offset t_ga +3.13 ms

Each bar shows a scale as its deviation from 1. IMU model: calyx. t_ga, the time offset between the gyroscope and accelerometer channels: +3.13 ± 0.37 ms.

Gyro scale x+0.52 %
Gyro scale y−1.26 %
Gyro scale z−1.44 %
Accel scale x−0.19 %
Accel scale y−0.12 %
Accel scale z+0.11 %
−8 %0+8 %
Timing cam0 td, first row −2.49 ms

The time offsets, to scale. td is the camera–IMU time offset, with t_imu = t_cam + td. For a rolling-shutter camera td is the time of the first image row; the middle row is td + readout / 2, which is what a global-shutter calibration reports.

-10 ms-5 ms+0 ms+5 ms+10 mscam0 td−2.49cam1 td−2.46t_ga+3.13
Full results Every solved parameter

Rotation is log(R) in rad, camera in the IMU frame.

ParameterMVIS
cam0
fx px532.54
fy px534.37
cx px636.86
cy px361.39
k1−0.07103
k20.03219
k3−0.00034
k4−0.00557
Lever x mm−0.16
Lever y mm−24.11
Lever z mm−21.27
log(R) rad[+2.2024, +2.2114, −0.0420]
td ms−2.486
Reprojection px0.474
Readout ms+14.06
cam1
fx px532.75
fy px536.02
cx px654.60
cy px340.71
k1−0.07322
k20.03995
k3−0.00006
k4−0.00525
Lever x mm−0.38
Lever y mm+96.02
Lever z mm−23.34
log(R) rad[+2.2011, +2.2085, −0.0358]
td ms−2.459
Reprojection px0.475
Readout ms+14.01
IMU
t_ga ms+3.13 ± 0.37
  • No independent reference. The authors publish a Kalibr calibration from the same recording with a global-shutter camera model; it isn't an independent check.
  • The time offset is given at the first image row. At mid-image, the time a global-shutter model reports, it is about 7 ms later (+4.5 ms).
  • The board is small (about 15 cm), so the image edges are covered less well and the principal point trades with the lens distortion: a Kannala–Brandt model moves it by about 10 px with no change in fit.
  • The recording runs at 19.7 Hz and the IMU at 381 Hz, below the 30 fps and 400 Hz on the sheet, probably from drops while recording.
  • Both cameras and the IMU together. Camera intrinsics (pinhole with radial-tangential distortion, as in the authors' calibration) start from a camera-only solve and stay free; rolling-shutter readout, camera time offsets, IMU scale and misalignment and the gyro-to-accel offset t_ga are estimated. IMU noise from the authors' IMU file. Solved 2026-11-16.